Do you require a sophisticated but simple method of transporting your bicycles? The Swagman XC2 Cross-Country Hitch Mount Rack 2-bike carrier could be ideal for you. The hitch-mounted bike carrier has an easy-to-adjust design that allows it to fit a variety of bike frame sizes and types.
While some may consider this rack’s 2-bike carrying capacity to be somewhat limited, it is one of the most secure hitch bike racks available. Each bike is securely fastened at the frame and both wheels, making theft difficult. You can also improve the security of your bike by purchasing a locking cable and hitch pin separately.
We go over all of the rack’s features in detail below.
Swagman bike racks are known for their versatility and style, and the XC2 Cross-country bike rack is no different. It transports both children’s and adult bikes with ease.
The XC2 has two upright ratcheting arms that hold the bikes in place and easily adjust to fit different bike frame sizes. This rack will accommodate bike frames up to 59cm in length. To protect bike frames from scratches, the arms are cushioned with a soft coating. The entire rack setup is powder-coated to protect the metal from corrosion.
It takes some effort to put together the rack and mount the bikes, but it’s not difficult. Once the bikes are securely fastened to the rack, you will transport them with as little wobbling as possible.
The XC2 is intended for use with cars, SUVs, trucks, and vans. It does not work with RVs, motor homes, or trailers.
Features of Swagman XC Cross-Country Hitch Mount Rack
The Swagman XC2 2-bike rack is a cross-country carrier constructed particularly for mountain bikes. It includes all of the features needed for worry-free bike transportation on cross-country experiences.
The XC2 is designed to fit hitches measuring 1-1/4 by 14 and 2 by 2 inches. It has a 4-inch knife rise that takes into consideration adequate ground clearance and keeps your bicycles from making unnecessary contact with the road. It fits the greatest tire width of 3.5 inches however you can purchase a separate tire plate for bigger tires on the off chance that you have a major bicycle. The XC2 takes the greatest load of 70lbs, which is 35lbs for each bicycle.
Installing the rack is not complicated but does take a couple of minutes. First, you need to set up the grip arms on the ratcheting mast; simply slide them down and they’ll snap securely in place. The pushbuttons on the arms allow for the bikes to be released To release the bikes for removal, slide the grip arms up the ratcheting mast by pressing the pushbuttons.
It is not difficult to install the rack, but it does take a few minutes. To begin, attach the grip arms on the tightening pole; essentially simply slide them down and they will snap safely set up. The bikes can be released using pushbuttons on the arms. To deliver the bicycles for expulsion, slide the hold arms up the ratcheting pole by pressing the pushbuttons to release the bikes for removal.
Once the grip arms are securely fastened to the ratcheting system, insert the rack into the receiver hitch using the appropriate adapter for your receiver – either a 1-1/4 by 14-inch or a 2 by 2-inch receiver.
The anti-wobble bolt is then threaded through. This bolt, as the name implies, prevents wobbling between the rack and the hitch when you hit the road. Before inserting the clip, make sure the bolt is securely tightened. When the rack is not in use, your setup should now be in the stow position, which frees up space.
The rack is now ready for you to load your bikes. You may now place the bike onto the rack; place the wheels in the respective wheel cradles and tighten them up. Next is to hook the grip arm onto the bike’s horizontal frame. You’re now all set for your journey.
Some bikes may be more difficult to position depending on the frame design, but with a little tinkering, it should work out perfectly.
The XC2 cross-country 2-bike hitch mount rack is a great bike carrier that fits a variety of bike frames, types, and wheelbase sizes. It provides unrivaled stability and security, which can be further enhanced with separately purchased accessories.
With a maximum load of two bikes, the XC2 is obviously a little limited, especially for families who need to transport more than two bikes. Having said that, this is a fantastic rack for the price and market it was designed for.